Product Introduction
CCM hydraulic rotary presses are specially designed to produce thermoplastic products by means of compression. A continuous work cycle is carried out, during which the plastic material is fed by a plasticization unit, cut into suitably sized pellets and then inserted inside the cavities. A hydraulic system clamps the moulds at a pressure which can be adjusted even while the production cycle is in progress.
Features:
1. It adopts advanced hydraulic system pressurized module
2. High speed, high precise, low energy consumption.
3. Full automatic, easy operation.
Advantages:
● Save time
● Save cost
● Save energy
Product Specification
Type |
Raw material |
Capacity (pcs/hr) |
Diamter |
Height |
Mould cav |
Comsumption |
Air compressor |
Voltage |
Weight |
16T |
PP / HDPE / LDPE |
8000-90000 (¢30) |
22-42 mm |
10-25 mm |
16cav |
16-20kw |
0.8mpa; 1.5m3 |
220v60hz /380v 50h |
2000kg |
24T |
PP / HDPE / LDPE |
22000-24000 (¢30) |
22-42 mm |
10-25 mm |
24cav |
32-35kw |
0.8mpa; 1.5m3 |
220v60hz /380v 50h |
4200kg |
36T |
PP / HDPE / LDPE |
36000-42000 (¢30) |
22-42 mm |
10-25 mm |
36cav |
58-60kw |
1.0mpa; 3.0m3 |
220v60hz /380v 50h |
5200kg |
Product Application
● Water bottle cap
● Juice drink bottle cap
● Oil bottle cap
● Milk bottle cap
● Toothpaste cap
Product Detail
Siemens PLC |
|
Siemens Servo Motor |
Product Qualification
1. We have mould coating machine from Sweden
2. All electrice part and hydraulic are genuine product gurantee
3. Before ship the machine, all machine will be tested one week at least.
Deliever, Shipping and Aftersales Service
1) Package detail:
● Outside package: standard export wooden case.
● Inner package: Stretch film; we spread anti-corrosive oil on the surface of the mould and then cover with plastic waterproof film.
● Spare parts together with the machine shipment.
2) Port:
● Shanghai port in China
3) After-sales service:
● If the main parts of the machine are damaged under non-human conditions within one year, we’ll provide new one for free.
● Online support
● Within 24hour feedback
FQA
Q1: What about installing?
A1: We will arrange engineer to install machine and train your workers.
Q2: What fair did you attend?
A2: We attended China-Plas, Interplas Thailand, Inooplas Indonesia, Vietnamplas, Bangladesh Plas, India Plast.
http://www.chinacapmachine.com/